5. Fasten the wooden support brackets attached to the top of the mantel assembly to the
Top (A) with 4) ST4 Screw 1
6. After assembling the mantel, lift to the
upright position. Carefully, push the fire-
place insert from the front of the mantel
as shown in Figure 33.
Figure 33
32
MANTEL
/
" (II) as shown in Figure 32.
9
16
A
II
Figure 32
Fireplace Insert
www.sureheat.com
7. Position the fireplace to the desired loca-
tion as shown in Figure 34.
Figure 34
Wall
200084-01A