OPERATION - General information
The appliance is intended only for domestic use, not for professional use.
8
1. Cover
2. Handle
3. Baking plate top
4. Baking plate bottom
OPERATION - First use
1. Remove all packaging.
2. Clean the baking plates to remove any residues from the manufacturing process (see "Cleaning and
maintenance"). Dry them thoroughly.
3. Put the plug into the wall socket and allow the waffle maker to heat up. This will take about 10 minutes.
Allowing it to heat will remove any packaging odour from the appliance.
WARNING:
•
The appliance may emit a little smoke and a characteristic smell when you switch it on for the first
time. This is normal, and will soon stop. Make sure there is sufficient ventilation in the room.
•
Keep house birds away from the appliance when it is in use. Fumes released from the non-stick
coating when the baking plates are hot may be harmful to birds.
OPERATION - Preparations
1. Place the appliance on a level, stable and heat-resistant
surface.
2. Close the lid.
3. Put the plug in the wall socket. The "Power" and "Ready"
indicator lights will illuminate.
4. Turn the themperature control dial to the required setting.
The required temperature has been reached once the
"Ready" indicator light exstinguishes.
7
5. Ready-to-use light (Green)
6. Temperature control dial
7. Power light (Red)
8. Power cord and plug
0
28
1
2
3
4
6
5
Light
± 135°C
± 150°C
± 165°C
± 180°C
± 215°C
Dark
EN