Publicidad
Idiomas disponibles
Idiomas disponibles
If there is a problem, this is shown on the displays.
Breakdown
Cause
code
No pan, a pan that is too small
E0
or a pan made of the wrong material
has been placed.
E1
Voltage too low.
E2
Voltage too high.
Temperature sensor is defective.
E3
The induction sensor is defective.
E4
Boil dry protection.
E5
The induction hob has overheated.
E6
Temperature sensor of the glass plate
E7
is defective.
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU). Observe
the rules that apply in your country for the separated collection of electric and electronic products. Correct disposal
of the product prevents negative consequences for the environment and for public health. The packaging material of
this product can be recycled 100%, return packaging material separately.
BREAKDOWNS & SOLUTIONS
Solution
Place a suitable pan in the centre of the cooking zone.
Check that your electrical system is 220-240V. If necessary, consult an electrical engineer.
Check that your electrical system is 220-240V. If necessary, consult an electrical engineer.
Contact the Inventum service department.
Contact the Inventum service department.
Wait for the temperature to return to normal and switch on the induction hob again.
Switch off the induction hob and allow the cooking zones to cool down. Switch the
induction hob on again and check that the ventilation is running smoothly.
Contact the Inventum service department.
RECYCLING
EN - 19
Publicidad
