Toolland TC90500 Manual Del Usuario página 5


Switch on the device.

Switch off the device after use.

Unplug the device from the mains.
Leave the ashes to completely cool down prior to blowing them away!
10. Cleaning and Maintenance

Always unplug the device before starting any cleaning and maintenance activity.

Clean the filter frequently. The frequency depends of the type of ashes you vacuum. Types of ashes can
differ. For some types of ashes, you will need to clean the filter more often than for other types.

Take off the filter and clean it with water. Let it dry afterwards. Do not use a dry cleaner of a hair dryer to
speed up the drying process of the filter. Never mount a damp filter into the ash cleaner!

Never clean the device with water but use a damp cloth to remove dirt.

Never use flammable or caustic products to clean the device.

Please contact your local dealer when you need spare parts for this appliance. Always mention the specific
serial number, which is mentioned on the rating label of the device.
11. Technical Specifications
power supply
power consumption
capacity
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.toolland.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 01 – 17/06/2015
TC90500
230 VAC, 50 Hz
1200 W
20 L
5 ©Velleman nv