Publicidad
Idiomas disponibles
Idiomas disponibles
Radio operations
~
Ÿ
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Selected band appears.
!
Start searching for a station.
To tune in to a station manually
In step ! above...
1
2 Select the desired station frequencies.
When an FM stereo broadcast is hard to
receive
Lights up when monaural mode is activated.
6
When a station is received,
searching stops.
To stop searching, press the
same button again.
Reception improves, but stereo effect will be
lost.
To restore the stereo effect, repeat the same
procedure. "MONO OFF" appears and the MO
indicator goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1
Select the FM band (FM1 – FM3) you
want to store into.
2
3
"SSM" flashes, then disappears when
automatic presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
1
2
Publicidad
