Belkin OmniView PRO Serie Manual Del Usuario página 15

F1D116_OSD_AM_man.qxd 4/20/00
Usage
AutoScan Mode:
To enable AutoScan mode, press [SCROLL LOCK] [SCROLL LOCK] [0] [0]. In AutoScan mode,
the OmniView
next. This time interval is set in the On-Screen Display menu.
NOTE: There is no mouse or keyboard control in this mode. This is necessary to
prevent errors. Otherwise, if the user is moving the mouse or using the keyboard
when the OmniView
will cause erratic mouse movement and/or the wrong characters to show up when
using the keyboard.
To get out of AutoScan mode, press the SPACEBAR.
4:07 PM Page 13
(continued)
Bank 0 (Master)
Bank 1 (Slave)
Bank 2 (Slave)
etc...
Bank 4 (Slave)
Enable AutoScan mode
PRO remains on one port for a number of seconds, before switching to the
™
PRO switches to the next port, data flow is interrupted and
™
13
etc...
En