CP PT031-T9000-I10S Manual De Instrucciones página 49

Dial Indicating Torque Wrenches*
Part Number Model
81972 TW-13
81982 TW-27
81992 TW-80
82002 TW-160
Torsion Static Torque Wrenches**
Part Number Model
615 165 146 0 CD4001
615 165 147 0 CD4005
615 165 148 0 CD4010
615 165 149 0 CD4050
615 165 150 0 CD4101
Test conditions
Temperature pulse unit: approx. 20° C.
Air pressure: 6,3 bar (90psi) dynamic
Hose size: 10 mm Hose length: 3 m
The tool should achieve the following values after maintenance:
Model Free speed (r.p.m)
PT031-T9000-l10S
Correct pulse frequency indicates that the air motor and the pulse unit are in good condition.
If the pulse frequency is too high - add oil. If the pulse frequency is too low - reduce oil.
Torque
Torque Range imper-
Range metric ial
0,5-13,5 Nm 4-120 lbf in
1-27 Nm 1-20 lbf ft
6-80 Nm 5-60 lbf ft
10-160 Nm 7,4-120 lbf ft
Torque Torque Range
Range metric imperial
1-15 Nm 0,7-11 lbf in
5-70 Nm 3,7-51,6 lbf ft
10-150 Nm 7,4-110,5 lbf ft
50-700 Nm 36,8-516 lbf ft
100-1500 Nm 73,7-1105 lbf ft
Pulse frequency (Hz)
7500 47-53
Min. Torque at max.
adj. (Nm)
35
Part no 2050505693
Issue no 1
Series no C
Date 2006-12
Page 49/49