AEG DIK6180HG Manual De Instrucciones página 61

The hoods light works independently to
other hood functions. To illuminate the
cooking surface touch the light symbol
. To change the light intensity touch
and hold the symbol again.
To turn off the appliance press the
again.
5.2 Hob²Hood function
It is an automatic function which connects the
hob with a hood. Both the hob and the hood
have an infrared signal communicator. Speed
of the fan is defined automatically on basis of
mode setting and temperature of the hottest
cookware on the hob. You can also operate
the fan using the hob manually. The function
can be activated from panel of the hob.
For more information how to use the
function refer to the hob user manual.
5.3 Activating Maximum Motor
Speed
When you press the button
Motor Speed starts to operate for 6 minutes.
After that time, the appliance returns to its
previous speed settings.
When the function is turned on, additional
touch on the button
any effects.
6. CARE AND CLEANING
6.1 Notes on cleaning
Cleaning Agents
symbol
, the Maximum
does not have
Do not use abrasive detergents and brushes.
Clean the surface of the appliance with a soft cloth with warm water and a mild detergent.
After cooking some parts of appliance can get hot. To avoid stains appliance must be
cooled down and dried with clean cloth or paper towels.
Clean stains with a mild detergent.
5.4 Filter notification
Filter alarm reminds to change or clean the
charcoal filter and clean the grease filter. The
filter indicator
seconds if the grease filter must be cleaned.
The filter indicator
seconds if the charcoal filter must be
replaced or cleaned.
Refer to cleaning the grease filter in care
and cleaning chapter.
Refer to cleaning the charcoal filter or
replacing the charcoal filter in care and
cleaning chapter.
To activate or deactivate function:
1. Switch on the control panel.
2. Make sure that the icons are turned off.
3. To activate function touch
seconds.
If the function is activated, the filter icon
flashes (white) five times.
4. To deactivate function touch
seconds.
If the function is deactivated, the filter icon
flashes (white) three times.
To reset the function touch
61
is turned on (white) for 30
flashes (white) for 30
for 3
for 3
for 3 seconds.