TO ADD JACK OIL
1. Position the jack on level ground and lower the
saddle.
2. Remove cover plate.
Cover plate
3. Remove the oil plug.
4. Fill the oil case until oil level is just beneath the
lower rim of the oil fill hole.
5. Replace oil plug.
Oil Plug
All manuals and user guides at all-guides.com
6.Replace coverplate and perform the Air Purge
Procedure.
Cover plate
TO REPLACE JACK OIL
1. Position the jack on level ground and lower the
saddle.
2. Open release valve by turning handle counter-
clockwise.
3. Remove cover plate.
Cover plate
4. Remove the oil plug.
11