Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT INSTALLATION (cont.)
INSTALLING THE BIDET ATTACHMENT
1 . Install Bidet Attachment on Toilet
a . Place bidet attachment on the toilet so the
nozzles are as close to the back of the toilet
bowl as they will go . This will vary by toilet .
b . Make sure the adjustable brackets line up with
the holes in the toilet fixture . You may need to
rotate the adjustable brackets to line up with
the bolt holes properly .
c . Replace the toilet seat on top of bidet
attachment and secure using original toilet
seat hardware . Make sure to tighten so that the
bidet attachment and seat do not move .
2 . Connect Cold Water Bidet Hose to Bidet
Attachment
a . Connect the open end of bidet hose to the
Cold connection on the back of the bidet
attachment .
Note: If you have already installed the Hot
Water Supply Cap over the hot water supply
on your SouthSpa, Skip to Step 4 on Page 11.
Otherwise continue with the installation at the
top of Page 11.
10
Step 1a
Step 1b
Step 2a
Publicidad
