Control Elements - TECshow DI BOX Manual De Usuario

3. CONTROL ELEMENTS

1. 1/4" unbalanced Connector, 1 unbalanced
6. 3 Imput
2. 1/4" unbalanced Connector. 1
output which can get an unbalance signal that
same as the one getting from the input.
3. 3Pin XLR Connector. 1 XLR balance output
which can make the user got a balance signal.
4. PAD 0dB/20dB/40dB. The unit itself can weaken
-20dB signal. The user also can use the SW of
the ATTENUATOR to weaken the output signal
by 0dB, -20dB, -40dB.
5. GND Selector. GROUND LIFT SW control the
signal earth linking to the unit earth.
6. 3 IN/THRU
P. 5
| Tecshow DI Box
English version