Publicidad
Idiomas disponibles
Idiomas disponibles
> Before Start
> Part Names
Turntable
Turntable
a Analog Audio Cable
10
> Install
> Initial Setup
a
> Playback
Supplementary information | Advanced Setup | Others
2. LINE IN connection
Connect an external device with an analog audio cable. You
can connect a turntable that has an MM-type cartridge to
the PHONO jack.
0 If the turntable has a built-in audio equalizer, connect it to
an LINE IN jack other than the PHONO jack. Also, if the
turntable uses an MC type cartridge, install an audio
equalizer compatible with the MC type cartridge between
the unit and the turntable, then connect to any LINE IN
jack other than the PHONO jack.
If the turntable has a ground wire,
connect it to the SIGNAL GND terminal.
SACD/CD
Publicidad
