BOJ W-1285B Manual De Uso página 15

3. Bracket installation
The appliance is equipped with a pair of brackets at
the top() and at the bottom.
This pair of brackets might not be needed and can
be removed as per your actual installation situation
when you build the appliance into your closet.
If the opening size of your closet is bigger than
the appliance, you could fix 4 screws(,ST4.0*13)
(packed separately in a plastic bag) into the inner
wood plate of closet. In this way, the appliance will be
built-in and fixed tight with your closet.
Note: Seller should not bear responsibility for any damages to the door or other parts
during operation if the end-user does not follow this instruction to fix the appliance with
closet when needed.
W-0820X, W-0820B,W-0821X, W-0821B
Figure 1
• Remove the lid .[Figure 3]
Figure 4
• Install the lid .[Figure 4]
Figure 5
• Install the right upper hinge  and screw tight
theM5*16 screws .[Figure 5]
Figure 6
• Turn the door  180 degrees, and insert the right lower
hinge , screw tight M5*16 screws . [Figure 6] Door
reversing is finished.
Figure 2
- 15 -
English