BOJ W-1285B Manual De Uso página 16

English
Open the door at 90 degrees and keep it steady.
• Unscrew the two screws from the right lower hinge  [Figure 1].
• Pull the door  outwards slowly [follow the arrow direction in Figure 2] to get off the
lower hinge  and continue to pull the door  downwards slowly until getting off from
the top right hinge , and take off the lower hinge plate  from the door axis hole
[Figure 2].
• Screw top right hinge & right lower hinge off from the cabinet and keep them in the
polybag for needs if you want to change back left opening door in the future.[Figure 3]
• Install the top left hinge & left lower hinge to the left side of the cabinet.(&
delivered in a separated polybag inside the packing carton).[Figure 4]
• Turn the door 180 degrees upside down and insert the lower hinge plate to the
bottom door axis hole. Fit the top door axis hole to the top left hinge and put lower
hinge plate slowly on the left lower hinge and keep the door steady. Screw up the left
lower hinge with the plate. Door reversing is finished.
Figure 3
W-1285X, W-1285B
1) Close the door.
2) Take off the door hinge cover on the up right corner;
Unscrew the flange screws; Take off door hinge;
Remove the up left side cap.
3) Lift the door up until the door gets off the lower door
hinge.
4) Unscrew the lower door hinge.
5) Fit the lower door hinge to the down left corner;
Figure 4
Put the door above and insert into the lower door
hinge.
- 16 -