Publicidad
7
Maintenance and cleaning
7.2 Cleaning of the Products
with Glass Doors
Remove the protective foil on the glasses.
There is a coating on the surface of the glasses.
This coating minimizes formation of stains and
provides easy cleaning of the stains and dirts that
have been formed. Glass that is not protected by
coating may be exposed to permanent bonding
of organic or inorganic, air and water-based
contaminants such as limestone, mineral salts,
unburned hydrocarbons, metal oxides and
silicones, which cause staining and physical
damage easily in a short period of time. Keeping
the glasses clean becomes very difficult, if not
impossible, despite the fact they are cleaned
regularly. As a result, the transparency and
appearance of the glass deteriorates. Hard and
abrasive cleaning methods and agents further
increase these defects and accelerate the process
of deterioration.
For routine cleaning processes, *non-alkaline and
non-corrosive water based cleaning products shall
be used.
In order to have a longer service life of this
coating, alkaline and corrosive substances shall
not be used during cleaning.
A tempering process is applied to increase the
resistance of these glasses against impacts and
breakage.
As an additional safety precaution, a safety film
has been applied to the rear surface of these
glasses to prevent harm to the environment in
case it breaks.
Refrigerator / User Guide
7.3 Preventing Odours
The product is manufactured free of any
odorous materials. However, keeping the food in
inappropriate sections and improper cleaning of
internal surfaces may lead to odours.
To avoid this, clean the inside with carbonated
water every 15 days.
Keep the foods in sealed holders.
Microorganisms may spread out of unsealed
food items and cause malodour.
Do not keep expired and spoilt foods in the
refrigerator.
C
Tea is one of the most effective odour
removers. Place the pulp of the brewed
tea in the product inside an open container
and remove it after 12 hours at the latest.
If you keep the tea pulp inside the product
for longer than 12 hours, it will collect the
organisms that cause the odour so it can
be the source of odour itself.
7.4 Protecting Plastic Surfaces
Oil spilled on plastic surfaces may damage the
surface and must be cleaned immediately with
warm water.
33 / 36 EN
Publicidad
