Asus ZenWiFi XD4 Plus Guía Rápida De Inicio página 2

Resolución de problemas
Si el router AiMesh no puede encontrar ningún nodo AiMesh cercano o
la sincronización falla, compruebe lo siguiente y vuelva a intentarlo.
Acerque, de ser posible, el nodo al router AiMesh. Asegúrese de que esté a menos de 3 metros.
a
Verifique que el nodo AiMesh esté encendido.
b
Monte el ZenWiFi XD4 Plus en la pared
55mm
¡IMPORTANTE! Puedes instalarlo con el logo de ASUS hacia arriba o hacia abajo, dependiendo de la colocación de tu
módem.
NO instale este equipo en el techo ni lo monte a más de 2 metros de altura.
NOTA: Se recomienda utilizar el anclaje y los tornillos suministrados.
FAQ
PREGUNTAS FRECUENTES
P1:
¿El router AiMesh admite el modo de punto de acceso?
R: Sí. Puede elegir entre configurar el router AiMesh en modo router o en modo punto
de acceso. Acceda a la interfaz gráfica de usuario (http://router.asus.com) y seleccione
Administration > Operation Mode (Administración > Modo de funcionamiento).
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our
environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other
components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed
recycling information in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we
published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain
compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual.
WARNING! This equipment must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 51 cm from all
persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Safety Notices
• Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
WALL
WALL
Cambio de lugar
Coloque el router y el nodo AiMesh en el mejor lugar posible.
NOTAS: Para minimizar las interferencias, mantenga los routers alejados de dispositivos como teléfonos inalámbricos,
dispositivos Bluetooth y hornos microondas.
Se recomienda colocar los routers en un lugar abierto o espacioso.
Indicadores LED del ZenWiFi XD4 Plus
Azul fijo:
El ZenWiFi XD4 Plus está listo para la configuración.
Blanco fijo:
El ZenWiFi XD4 Plus está conectado y funciona correctamente.
Rojo fijo:
El router ZenWiFi XD4 Plus no tiene conexión a Internet.
P2:
¿Se puede establecer una conexión por cable entre los routers AiMesh (backhaul Ethernet)?
R: Sí. El sistema AiMesh admite tanto la conexión inalámbrica como la conexión por cable entre el router
AiMesh y el nodo para maximizar el rendimiento y la estabilidad. AiMesh analiza la intensidad de la señal
inalámbrica para cada banda de frecuencias disponible y, a continuación, determina automáticamente si una
conexión inalámbrica o por cable es la mejor para servir de eje central de la conexión entre routers.
1 Primero, siga los pasos de configuración para establecer una conexión entre el router AiMesh y el nodo
vía WiFi.
2 Coloque el nodo en la ubicación ideal para obtener la mejor cobertura. Pase un cable Ethernet desde el
puerto LAN del router AiMesh hasta el puerto WAN del nodo AiMesh.
Modem
3 El sistema AiMesh seleccionará automáticamente la mejor ruta para la transmisión de datos, ya sea por
cable o inalámbrica.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.
• Utilisez ce produit dans un environnement dont la température ambiante est comprise entre 0˚C (32°F) et 40˚C (104°F).
• Référez-vous à l'étiquette située au dessous du produit pour vérifier que l'adaptateur secteur répond aux exigences de
tension.
• NE PAS placer sur une surface irrégulière ou instable. Contactez le service après-vente si le châssis a été endommagé.
• NE PAS placer, faire tomber ou insérer d'objets sur/dans le produit.
• NE PAS exposer l'appareil à la pluie ou à l'humidité, tenez-le à distance des liquides. NE PAS utiliser le modem lors d'un
orage.
• NE PAS bloquer les ouvertures destinées à la ventilation du système pour éviter que celui-ci ne surchauffe.
• NE PAS utiliser de cordons d'alimentation, d'accessoires ou autres périphériques endommagés.
• Si l'adaptateur est endommagé, n'essayez pas de le réparer vous-même. Contactez un technicien électrique qualifié ou
votre revendeur.
• Pour éviter tout risque de choc électrique, débranchez le câble d'alimentation de la prise électrique avant de toucher au
système.
• Ne placez pas cet appareil à une hauteur supérieure à 2 mètres.
This device is restricted for indoor use only.
Cet appareil convient uniquement à un usage intérieur.
Manufacturer ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan
Authorised ASUS Computer GmbH
representative in
Address: HARKORT STR. 21-23, 40880 RATINGEN, GERMANY
Europe
Authorised BOGAZICI BILGISAYAR TICARET VE SANAYI A.S.
distributors in
Tel./FAX No.:
Turkey
Address: ESENTEPE MAH. BUYUKDERE CAD. ERCAN HAN B BLOK NO.121 SISLI, ISTANBUL 34394
CIZGI Elektronik San. Tic. Ltd. Sti.
Tel./FAX No.:
Address: GURSEL MAH. AKMAN SK.47B 1 KAGITHANE/ISTANBUL
KOYUNCU ELEKTRONiK BiLGi iSLEM SiST. SAN. VE DIS TIC. A.S.
Tel. No.: +90 216 5288888
Address: EMEK MAH.ORDU CAD. NO:18, SARIGAZi, SANCAKTEPE ISTANBUL
ENDEKS BİLİŞİM SAN VE DIŞ TİC LTD ŞTİ
Tel./FAX No.:
Address: NECIP FAZIL BULVARI, KEYAP CARSI SITESI, G1 BLOK, NO:115 Y.DUDULLU, UMRANIYE, ISTANBUL
PENTA TEKNOLOJI URUNLERI DAGITIM TICARET A.S
Tel./FAX No.:
Address: ORGANIZE SANAYI BOLGESI NATO YOLU 4.CADDE NO:1 UMRANIYE, ISTANBUL 34775
EL MEJOR RENDIMIENTO
LAN-WAN
+90 212 331 10 00 / +90 212 332 28 90
+90 212 356 70 70 / +90 212 356 70 69
+90 216 523 35 70 / +90 216 523 35 71
+90 216 528 0000