Descargar Imprimir esta página

Haier HLTW500AXW Manual Del Usuario página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

FEATURES
HIGH-EFFICIENCY
This washer utilizes a pulsator wash system to gently clean clothes using less
water and energy than a traditional agitator washer.
Less water produces a concentrated water and detergent solution that
aggressively works to loosen soils.
Use only High-Efficiency detergent. The proper detergent label should
include an "H-E" logo or the words "High-Efficiency". Regular detergents will
create excessive suds that can damage washer components, reduce rinse
performance, and lead to soap lm build-up that creates mold and mildew.
Follow the detergent manufacturer's instructions for the amount of H-E
detergent to use.
IMPORTANT: The wash basket will not ll with water like a traditional agitator
washer. It is normal for some of the clothes to be above the water level. As the
washer dampens the load and begins to move garments, they will settle to the
bottom basket. Do not add garments to ll the basket.
AUTOMATIC LOAD SIZE SENSING
The control panel does not have a water level button because the washer is
equipped with sensors and intelligence to automatically measure the load size
and properly determine the amount of water necessary for a high-efficiency
wash.
IMPORTANT: As the washer dampens the load and begins to move garments,
they will settle to the bottom basket. Do not add garments to ll the basket.
AUTOMATIC TEMPERATURE CONTROL
This washer is equipped to measure the temperature and ow rate of incoming
water. Special programming determines the proper hot and cold mixture for
each Wash Temp setting to achieve targeted water temperatures. This is
especially helpful in cold climates when the incoming water is extremely cold.
Hot water will be added to a Cold wash to make sure the water temperature is in
a range where detergent is effective.
The washer works by rst lling with cold water for all Wash Temp settings,
including Hot and Warm. Then the washer switches to lling with hot water.
After the washer has sensed both cold and hot water, the proper mixture is used
to complete lling the wash tub.
16

Publicidad

loading