Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the Cable
The OZ Lifting Products LLC ® cable assembly that can be ordered with the STEEL DAVIT CRANE
by OZ Lifting Products LLC ® will come with a swaged ball on one end to facilitate easy assembly.
Standard bare end cable can also be used. The hardware for bare end cable installation is included.
Please refer to the accompanying winch owner's manual for instructions on installing a bare end cable.
To install the OZ Lifting Products LLC ® supplied cable:
1. Lay the cable out on a flat surface to ensure it is not knotted or looped.
2. Locate the ball end of the cable.
3. Locate the "keyhole" in the winch drum that accepts the ball end of the cable.
4. Thread the ball end of the cable over the load sheave pulley and towards the winch.
5. Insert the ball end fitting of the cable into the "keyhole" feature in the winch.
6. Ensure that the ball end of the cable slides into the slot in the "keyhole" and cannot be pulled out.
7. Manually spool at least 4 full wraps of cable onto the winch drum. There must be at least 4 full
anchor wraps of cable on the winch drum at all times.
8. Install cable-retainer pin by inserting into holes at the tip of the boom.
NOTE: To ensure the maximum amount of cable can be spooled onto the winch, the cable must
be neatly spooled onto the winch drum. If the cable is not spooled neatly onto the winch drum, the
cable capacity will be reduced and handle effort may increase. Cable that is not spooled neatly can
consume 30% more space on the winch drum, reducing cable capacity.
Operating the Crane
Warnings & Precautions
Operators should read and fully comprehend this entire manual and all warnings on the STEEL DAVIT
CRANE by OZ Lifting Products LLC ® before beginning crane operation. If this manual is not read and
followed completely, injuries and damage may occur. For questions regarding operation, please contact your
OZ Lifting Products LLC ® dealer.
Before operating the crane, be sure all parts are clean and properly lubricated. The crane must be in
proper working condition and maintenance records must be up to date to proceed with operation. The
area of operation must be clear of all flammable materials.
It is important to maintain secure footing while operating the crane. Confirm that the crane is attached
securely to a a strong, level, solid foundation before operation. Slowly take up a load, verifying that it
is well supported and balanced before proceeding with operation.
All operators MUST:
• Be trained in proper crane operation and in dealing with potential malfunctions.
• Abstain from use of alcohol, medications, or drugs while operating.
• Avoid operation while tired or distracted.
• Avoid operation if they have a history of seizures or other medical issues that may interfere with
crane operation.
• Have proper coordination and vision.
EN pg.7
Publicidad
