Dometic 9600000083 Instrucciones De Montaje Y De Uso página 14

Technical description
6 Technical description
The colour camera with integrated microphone is encased in an aluminium housing
and transmits image and sound to a monitor via a cable. The infrared LEDs improve
night vision.
The camera can switch between long-distance and close area. The long-distance
mode shows the space behind the vehicle as if you were looking through a rear
window. The close area mode switches on when you engage the reverse gear and
shows the space directly behind the vehicle.
I
NOTE
The cameras is equipped with a reverse display at the factory.
Any monitor that is connected therefore needs a normal picture
function.
The camera consists of the following elements:
No. in
Designation
fig. 9, page 4
1 6-pin connection cable
2 Lens
3 Microphone
4 Infrared LEDs
7 Notes on the electrical connection
7.1 Laying cables
A
NOTICE! Beware of damage
• When drilling holes, check beforehand that there is sufficient space
on the other side for the drill head to come out.
• Cables and connections that are not properly installed will cause
malfunctions or damage to components. Correct installation of
cables and connections ensures lasting and trouble-free operation of
the retrofitted components.
• The cables may not be exposed for long periods to solvents such as
benzene, since solvents can damage the cable.
14
PerfectView CAM604
EN