hafele DT 710 Instrucciones De Funcionamiento página 15

11. Cleaning / maintenance
11.1 Cleaning
11.2 Servicing /
maintenance
NOTE
Damage to product due to incorrect cleaning!
> Do not use cleaners containing alcohol, organic solvents or thinners.
> Do not use abrasive materials.
> Do not use pressure or steam cleaning devices.
Clean outer surfaces of product if necessary:
• with a dry, soft cotton cloth or
• a damp cloth and a little washing-up liquid or neutral cleaner.
The product is maintenance-free apart from having to change the batteries.
NOTE
Damage to product due to incorrect maintenance!
> Do not use lubricants.
> Do not carry out repairs.
> Contact the manufacturer in the event of damage / malfunctions.
> If parts have to be replaced, always use original spare parts from
Häfele.
Battery change
If the battery charge is low, the red and white LED flash alternately three times when
the electronics are switched on by presenting a key.
NOTE
Malfunction due to low battery charge!
Problem-free operation is only ensured if adequately charged batteries are
used.
> Replace weak batteries immediately as soon as the signal occurs!
> Always use new AA batteries.
> Always replace all four batteries.
The date and time are saved when the batteries are removed. This information is
reloaded when new batteries are inserted.
The clock stops for the duration of the battery change.
The batteries should therefore be changed quickly.
If the time has to be exact to the nearest minute, it can be set using the DIALOCK
MDU after replacing the batteries.
The locking authorisations for the user keys are also retained after a battery change
and do not have to be reset.
For step-by-step instructions "Battery change" see illustrations
starting on page 58.
AA
NOTE
> Do not throw batteries in the household waste!
> Dispose of batteries in an environmentally friendly way, e.g. using a mu-
nicipal collection point.
15