Makita DJR183 Manual De Instrucciones página 6

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Indicator lamps
6. Check button
7. Lock-off button
8. Lock-off lever
SPECIFICATIONS
Model
Length of stroke
Strokes per minute (min
Max. cutting capacities
Overall length
(Depending on the battery)
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Intended use
The tool is intended for sawing wood, plastic and ferrous
materials.
General power tool safety
warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
6
Explanation of general view
9. Switch lever
10. Switch trigger
11. Lamp
12. Hex wrench
13. Hex bolt
14. Loosen
15. Recipro saw blade
16. Blade clamp sleeve
DJR143
-1
)
Pipe
Wood
392 - 397 mm
1.5 - 1.7 kg
D.C. 14.4V
D.C.14.4 V Model
D.C.18 V Model
ENE020-1
GEA010-2
17. Saw blade
18. Bolt
19. Tighten
20. Hole for recipro saw blade
21. Blade clamp
22. Hole for jig saw blade
23. Protrusion
DJR183
13 mm
0 - 3,000
50 mm
50 mm
1.5 - 1.9 kg
BL1415N/BL1430B/BL1440/BL1460B
BL1815N/BL1820B/BL1830B/BL1840B/BL1850B/BL1860B
DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF/
DC18SH/DC18WC
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless recipro saw safety
warnings
1. Hold the power tool by insulated gripping
surfaces, when performing an operation where the
cutting accessory may contact hidden wiring.
Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
2. Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding
DJR185
392 - 398 mm
1.5 - 1.8 kg
D.C. 18V
GEB188-3