Home Decorators Collection 34545-HBUN Manual De Instrucciones página 14

Assembly - Flushmount (continued)
6
Mounting the fan
WARNING: The locking slots of the celling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
□
Carefully unhook the fan from the mounting bracket (B) and
align the locking slots of the ceiling canopy (C) with the two
screws in the mounting bracket (B). Push up to engage the
slots and turn clockwise to lock the canopy (C) in place. Im-
mediately tighten the two canopy screws (AA) firmly.
□
Install the remaining two canopy screws (AA) into the holes in
the canopy (C) and tighten firmly.
AA
B
C
8
Installing the light bulbs and
glass bowl
□ With the power off, install the two LED bulbs (I)
(Max. 5W provided) into the light bulb sockets.
□ Place the glass bowl (H) into the light kit panel, aligning
the three flat areas on the top flange of the glass bowl
(H) with the three raised dimples in the light kit panel.
Turn the glass bowl (H) clockwise until it stops.
7
Attaching the fan blades
□ Remove and save the set screws (2) on the decorative sheet.
□ Remove the decorative sheet from the top motor housing.
□ Attach the fan blades (A) to the fan motor assembly (G)
□ Repeat these steps for the remaining blades (A).
□ Reattach the decorative sheet on top motor housing, line up
AA
G
14
by using the blade screws (BB) and fiber washers (CC).
Tighten blade screws (BB) securely.
the 2 holes, insert the screws and tighten.
BB
CC
A
G
I
H