Publicidad
Idiomas disponibles
Idiomas disponibles
12 Hookups (cont'd)
DVD/VCR to a TV and to a Stereo that is Dolby Digital-compatible
Stereo
COAXIAL
DIGITAL
AUDIO IN
1
Connect a coaxial digital audio cable (not supplied) to the
DVD/VCR's COAXIAL DIGITAL AUDIO OUT jack and to the
COAXIAL DIGITAL AUDIO IN jack on the Stereo.
This digital audio connection only provides sound for the DVD player of the DVD/VCR.
So,in order to use the VCR features,connect the supplied red/white audio cable. To
connect the red/white audio cable,see step 5 on page 9.
2
Connect the supplied yellow video cable to the yellow DVD/VCR
VIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on
the TV. To use component video cable or S-Video cable instead for the DVD
player,see page 10. You will still need the yellow video cable for VCR features.
3
Plug in the power cords of the Stereo, TV and DVD/VCR. Turn on
the Stereo and select its Auxiliary IN channel. Turn on the TV and
set it to the correct Video In channel. Go to your TV's lowest channel (01
or 02) and change channels downward until you see DVD or VCR material on the
TV screen.
To help you find the right Video In channel on the TV,turn on the DVD/VCR.Press
DVD to put the DVD/VCR in DVD mode. With no disc in the player,a large DVD
Video logo will appear on the TV screen when you get the TV on the correct Video
In channel.
Make sure Progressive Scan (PROG.SCAN) is OFF and P.SCAN does not appear on
the DVD/VCR's display panel. Disable
Menu or by pressing and holding PLAY B (DVD) on the front of the
DVD/VCR for more than 5 seconds. Details are on pages 8 and 51.
4
You are ready to turn on the DVD/VCR. Go to page 14 before
turning on the DVD/VCR.
Remember...
Some DVDs are recorded in Dolby Digital Multi-channel Surround Sound.Select Dolby
Digital Multi-channel Surround Sound in the DVD Disc Menu.If Dolby Digital Surround
Sound is not recorded on the disc,you will not have surround sound available.
If you connect the DVD/VCR to a Dolby Digital Stereo,set DOLBY DIGITAL to
BITSTREAM in the DVD player's Setup Menu. Details are on page 52. If the DVD/VCR is not
connected to a Dolby Digital-compatible Stereo,set DOLBY DIGITAL to PCM.
Incorrect settings may cause noise distortion and damage the speakers.
All manuals and user guides at all-guides.com
Using Digital Audio connections
DVD
DVD/VCR
VCR
D GITAL
OMPON NT
AUD O
S-V DEO
AUD O OU
AUDIO IN
V DEO OUT
AUDIO OUT
OUT
OUT
Y
L
L
L
C
B
R
R
P
B
COAX AL
VIDEO OU
VIDEO IN
R
C
R
P
R
1
Coaxial Digital Audio
Cable (not supplied)
Progressive Scan either in the DISPLAY
2
Video Cable
(supplied)
Back of TV
(example only)
VIDEO IN
Publicidad
