Publicidad
Idiomas disponibles
Idiomas disponibles
TV tuner (SRC mode)
4
To perform manual tuning, briefly
touch c or d.
The channels move up or down step by step.
# You can also perform manual tuning by press-
ing c or d button.
5
To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip
broadcasting channels. Seek tuning starts as
soon as you release the keys.
# You can also perform seek tuning by pressing
and holding c or d button.
Storing and recalling
broadcast stations
If you touch any of the preset tuning keys
P1P12 you can easily store up to 12 broad-
cast stations for later recall with the touch of a
key.
% When you find a station that you want
to store in memory, keep touching one of
preset tuning keys P1P12 until the preset
number stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
ory.
The next time you touch the same preset tun-
ing key the station is recalled from memory.
# To switch between P1P6 and P7P12, touch
or
.
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P1P6 and P7P12 are not displayed,
you can display them by touching LIST.
Notes
! Up to 24 stations, 12 for each of two TV bands,
can be stored in memory.
! You can also use a and b to recall stations
assigned to preset tuning keys P1P12.
Section
04
13
En
Publicidad
