Auto Water Fill (applicable models only)
Untitled-1 67
1. Grasp a handle groove of the sealed
mouth, and then pull up to remove.
2. Grasp both sides of the sealed mouth,
and then lift to remove.
3. While slightly twisting the infuser, pull
it out of the sealed mouth.
4. Clean the infuser with neutral agents
and running water. Rinse and dry well.
5. Reassemble the Auto Water Fill in the
reverse order of disassembly.
CAUTION
Water pitcher and lid are not dishwasher
safe and can deform under high
temperatures. Please hand wash as
needed.
English 67
2019-01-17
11:18:25