Asist ARZ3H001 Instrucciones De Uso página 25

GBR
GENERAL SAFETY CONDITIONS FOR ASIST AND ASIST SMART GARDEN TOOLS.
ADDITIONAL SAFETY INSTRUCTIONS
Read all safety warnings
and instructions.
All safety warnings and instructions
keep for future reference.
To ensure the highest possible level of protection
and wearing comfort, the following must be observed
information and safety instructions.
● Before each use of the helmet, check that
all components are correctly mounted,
set up and maintained.
● Use the helmet only with the correct adjustment,
to ensure the desired protective effect.
● A helmet cannot provide absolute protection
before injury and is not a substitute for safe
work.
● The construction/painting of the helmet must not be
changed.
● Do not bring the helmet into contact with liquids
containing
solvents or alcohol. You can
cause damage to the plastic.
● The helmet can be damaged by impacts or blows,
which do not show outwardly visible damage (e.g.
hairline cracks). So it is not provided in an emergency
full protection. Replace the helmet as soon as po-
ssible
will be subjected to heavy loads.
● The helmet must be inspected before each use
in terms of damage such as cracks
or cracks. Use only an undamaged helmet
and its accessories.
● Do not make any changes to the helmet, otherwise
the protective effect may be adversely affected.
● Follow all installation instructions and guidelines,
adjustment and maintenance of hearing protectors.
● The hearing protector protects in the areas where it
is expected
negative impact of noise.
● The use of hearing protection is necessary for a
period
ongoing noise load.
● The cushions of the hearing protectors may as a
result
wear out with use and therefore necessary
check for cracks after use
or leaks.
● Do not use chemicals to clean the hearing protector
nor substances that are harmful to the user.
● This product may be affected by certain
chemicals to damage. More information is needed
request from the manufacturer.
● Ear muffs and especially sealing cushions
can wear out with use and therefore
should be checked frequently for
for example signs of cracks and leaks.
ARZ3H001 - Forest Protection helmet
● Packing of sealing cushions with a „hygienic cover"
can affect the acoustic performance of the clam shell
hearing protectors.
In the event of non-compliance with the stated safety
the instructions for the hearing protection can be
protective effect seriously compromised.
● The visor must always be folded down when worn.
● The visor protects against the danger of flying parts.
● Visor protects against splashing, hot liquids
objects, electricity, infrared and UV
radiation.
● Do not use the visor if there is a foreseeable
risk due to flying hard
and sharp objects.
● As a result of chips and their resin, it can
clog the visor and affect transparency.
Use as intended
The forestry protective helmet is intended for protec-
tion
wearer from head injury caused by falling objects
or flying objects and impacts against
stationary objects.
Hearing protection is used to protect against noise
and disturbing sounds.
Attach the hearing protection only to the forester
protective helmet ARZ3H001
The hearing protector has a „medium" size range and
„great" and thus suits the vast majority of users.
Any other use or modification of forest protection
helmets are considered misuse
and pose a significant risk of injury. for damages,
which arise when used contrary to the intended
purpose,
the manufacturer is not responsible. Forest protection
the helmet is not intended for commercial use.
SAVE THESE SAFETY INSTRUCTIONS !!!
DESCRIPTION
1 helmet
2 visors (with retaining arm)
3 ear protection
4 head holder settings
5 hearing protection settings
6 Head console
Scope of delivery
1 helmet with adjustable head holder and sweatband
tape
2 hearing protection
1 visor (with holding arm)
1 instruction manual
Figure K:
1.) CE marking
2.) The standard used
25