Radio Mode by Band Switch Button
Click AMS button to select your desired band.
EQ: Control Button
DSP tone (EQ off/EQ1/EQ2/EQ3)
Power Switch(POWER)
Switch on the unit by pressing the POWER, then the button light will be on. It stays the mode of FM radio
before inserting the SD card and USB flash disk. Or it keeps the mode as the lastest shutdown.
Press the POWER key in any mode, it will display the time, and then short press or press for 3 seconds
without keying action to return to the currently displayed mode.
Mute Key (MUTE)
The button is used for controlling the mute switch: Click MUTE button to restrain sound temporally, in this
way, you'll get the mute effect. If you click the button again, the normal sound will be resumed.
Mode Switch Button (MODE)
14
Click MODE button to switch modes among radio, AUX and MP3 playing modes.
MMC/SD Compartment & USB Jack and the Relevant Operation
During the reception of a radio, if you want to play MMC/SD or USB, you can insert MMC/SD card or USB
into the corresponding hole and the player will play the songs in MMC/SD or USB automatically. Meanwhi-
le, the relevant information will appear on the display (if MMC/SD and USB are inserted in the same time,
the later inserted one will be played) and then the music will be played.
Clock Function
During standby status, click CH+ button to start time-setting status. Press CH+ button again, the time can
be switched between Hour and Minute modes and the relevant information will appear on the display. After
3 seconds, the display will return to the former status.
USB/SD Card Switch Button
Press MODE transitorily (when a MMC/SD card and a USB are inserted at the same time) to switch betwe-
en SD and USB playing modes.
Major Indexes
• Power output: 45W 4x
www.multilaser.com.br