Publicidad
Idiomas disponibles
Idiomas disponibles
Sliding Latch Plate and ELR Retractor
A latchplate that slides freely on the belt webbing and
cannot, by itself, hold the belt snug around a car seat.
With this retractor, you will need to use the locking clip to
lock the vehicle seat belt.
Call us at 1-800-345-4109 to order a locking clip.
Route the vehicle seat belt through the proper belt path
and buckle it in. Pull the vehicle seat belt tight. While
pushing down on seat, pinch the two straps together
behind the buckle tongue. Unbuckle the belt without
allowing it to slip.
1" (2.5 cm)
Attach locking clip to lap and shoulder belts as shown.
Rebuckle belt. Check that lap belt does not move
by pulling hard. If belt loosens or lengthens, repeat
procedure.
80
Publicidad
