Philips HQ6832 Manual Del Usuario página 8

ENGLISH
10
2
1
C
C
All manuals and user guides at all-guides.com
Troubleshooting
1 Reduced shaving performance
Cause 1: the shaving heads are dirty.
B
The shaver has not been rinsed long enough or
B
the water used was not hot enough.
Clean the shaver thoroughly before you
continue shaving (see 'Cleaning').
Cause 2: long hairs are obstructing the shaving
B
heads.
Remove the retaining frame.
Remove the hairs with the brush supplied.
Clean the cutters and guards.
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
Put the retaining plate back onto the shaving
unit.
Cause 3: shaving heads are damaged or worn.
B
Remove the retaining frame.
Remove the old shaving heads from the
shaving unit and replace them with new ones
Damaged or worn shaving heads (cutters and
guards) must only be replaced with the original
Philishave HQ6 Quadra Action shaving heads.