Telephone Helpline: 0845 146 2887
Installation
Remove all packaging and dispose of it safely. Peel protective film from Glue Board and slide
it, glue side up under the clips at base of the Glue Trap.
Note: Please ensure the mounting substrate and fixings used can support the weight of the
appliance. If in doubt seek professional advice or assistance.
Wall mounting
The unit can be wall mounted using the brackets supplied.
When mounting the brackets should be positioned 380mm apart
The unit should be mounted so the brackets do not foul the lamp
starter
Ceiling Mounting
The unit can be wall mounted using the chain supplied
A – Brackets
B – Starter
C – Light Tube
UK