Publicidad
Idiomas disponibles
Idiomas disponibles
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Sound-control:
Flash-rate:
Number of colours:
Number of gobos:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature t
Maximum housing temperature t
Fuse:
Fitting lamps:
OMNILUX EHJ 24V/250W G-6.35 50h 3000K
GE EHJ A1/223 24V/250W G-6,35 50h
OSRAM EHJ 64655HLX A1/223 24V/250W G-6,35
OMNILUX EVC 24V/250W G-6,35 300h
OSRAM 64657HLX EVC M33 24V/250W G-6,35
Recommended controllers:
EUROLITE DMX Operator 192 Kanal
EUROLITE DMX Scan Control 192 Kanal
Wizard-1024 DMX-Software + Interface
Please note: Every information is subject to change without prior notice. 03.09.2004 ©
220-250 V/50 Hz
300 W
3
3-pin XLR
via built-in microphone
1-5 Hz
11 dichroic + white
9 gobos + open
320 x 280 x 280 mm
9 kg
45° C
:
a
(steady state):
80° C
B
T 3 A, 250 V
No. 88289005
No. 88289000
No. 88289010
No. 88290005
No. 88290010
No. 70064520
No. 70064525
No. 51860110
29/55
51785855_V_1_3.DOC
Publicidad
