Publicidad
Idiomas disponibles
Idiomas disponibles
DO9145KR-DO9146KR
including the measuring cup in the feed tube.
3. Place the blender on the connection point and lock the blender by turning it
counterclockwise.
4. Use the speed regulator to blend.
5. During blending, it is possible to remove the measuring cup from the lid and add
ingredients through the feed tube. Then always close the opening again with the
measuring cup.
Note:
•
Never run the blender empty.
•
Never fill the work bowl with boiling fluids; always allow them to cool to room
temperature.
•
If you want to crush ice, do not use more than 9 ice cubes (4x4x2 cm) at a time.
DISASSEMBLY
1.
Remove the plug from the socket.
2.
Remove the lid from the mixing bowl.
3.
Turn the release button a quarter turn to the left, push the head up entirely and
turn the release button to the right again, so that it points upwards, to lock the
head.
4.
Push the accessory out of the locked position and turn it clockwise a quarter turn.
Then slide the accessory off of the drive shaft and remove the accessory. Use
caution when removing the accessories since there may be sharp edges.
5.
Turn the bowl counterclockwise out of the lock position and remove the bowl.
6.
Turn the release button a quarter turn to the left, push the head down entirely and
turn the release button a quarter turn to the right again so that it point upwards, to
lock the head.
CLEANING
1. Always remove the plug from the socket before cleaning the appliance.
2. Never immerse the motor unit in water or under running water. Clean the motor
unit with a soft, damp cloth.
3. Disassemble all accessories according to the instructions under the section
'Disassembly'.
4. For quick cleaning, rinse the accessories under running water.
5. For thorough cleaning, wash, rinse and dry the accessories.
6. To clean the blender, combine warm water with a few drops of detergent in the
blender. Put the lid on the blender. Briefly turn the speed regulator to pulse and
back. Repeat if needed. Rinse the blender under running water and allow it to
drip-dry upside down.
42
Publicidad
