Pressalit Care R4660 Instrucciones De Uso Y Mantenimiento página 5

Adjustment
Bracket with electric motor and lever control:
1: Lift lever gently, wash basin will rise.
2: Press lever gently downwards, wash basin will lower.
Bracket with electric motor and hand control:
1: Press and hold the "Up" indicator, wash basin will rise.
2: Release indicator to stop.
3: Press and hold the "Down" indicator, wash basin will
lower.
4: Release indicator to stop.
Bracket with gas cylinder and lever control:
1: Lift lever control up or press down to release the wash
basin for height adjustment.
2: When the right height has been found, return the lever
to a horizontal position.
3: The wash basin will be locked in the new position.
Manually operated bracket with lever lock:
1: Keep lever lock in raised position. Lift wash basin
simultaneously, a click can be heard.
2: The wash basin can now be adjusted for height.
3: Engage lever in ratchet to lock position.
For brackets mounted on horizontal wall track:
1: Use screwdriver to loosen lock.
2: Move bracket to desired position.
3: Retighten lock.
Cleaning
Daily:
• Use ordinary soapy water. Avoid abrasive, corrosive and
chlorine-based cleaning agents. Rinse off with clean water
and wipe with a dry cloth.
• This product cannot be cleaned in an autoclave.
Occasional:
• Removal of lime spots on aluminium parts: Use 3 parts
30% domestic vinegar to 7 parts water, wipe off with a
well-wrung damp cloth (clean water).
6
6
7
6
7
5