Publicidad
Idiomas disponibles
Idiomas disponibles
Minimum gauge for Cord sets
Total length of Cord in Feet
Volts
120 V
25 (7.6)
240 V
50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)
Ampere Rating
More
not
Than
More
Than
0
6
18
6
10
18
10
12
16
12
16
14
WARNING: Always wear proper personal hearing
protection that conforms to ANSI S12.6 (S3.19)
during use. Under some conditions and duration
of use, noise from this product may contribute to
hearing loss.
WARNING: ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Usage of a face or
dust mask is optional unless it is required by OSHA
or other governmental/provincial institutions for the
application being performed. Always use appropriate
face or dust mask if in doubt. WHEN REQUIRED ONLY
USE CERTIFIED SAFETY EQUIPMENT:
•
ANSI Z87.1 eye protection (CAN/CSA Z94.3)
•
NIOSH/OSHA/MSHA respiratory protection.
WARNING: Some dust contains chemicals known to
the State of California to cause cancer, birth defects
or other reproductive harm. Some examples of these
chemicals are:
•
compounds in fertilizers,
•
compounds in insecticides, herbicides and
pesticides,
•
arsenic and chromium from chemically-
treated lumber.
To reduce your exposure to these chemicals, wear approved
safety equipment such as dust masks as required by OSHA
or other governmental/provincial institutions for the
application being performed.
For your convenience and safety, the following warning
labels are on your vacuum.
ON MOTOR HOUSING
(On back of vacuum head):
WARNING:
•
THIS VACUUM MEETS THE EPA LEAD RELATED
RENOVATIONS, REPAIR AND PAINTING (RRP) RULE FOR
HEPA VACUUM ONLY IF DWV9320 OR DWV9330 HEPA
FILTER IS USED.
•
TO REDUCE THE RISK OF INJURY, USER MUST READ
INSTRUCTION MANUAL. DO NOT RUN UNATTENDED.
DO NOT PICK UP FLAMMABLE, COMBUSTIBLE OR
HOT MATERIALS. DO NOT USE AROUND EXPLOSIVE
DUST, LIQUIDS OR VAPORS. ELECTRICAL DEVICES
PRODUCE ARCS OR SPARKS WHICH CAN CAUSE FIRE
OR EXPLOSION. DO NOT USE AT FILLING STATIONS OR
ANYWHERE GASOLINE IS STORED OR DISPENSED. DO
(meters)
50 (15.2) 100 (30.5) 150 (45.7)
American Wire gauge
16
16
16
14
16
14
12
Not Recommended
NOT VACUUM TOXIC OR CARCINOGENIC MATERIALS
OR OTHER HEALTH ENDANGERING MATERIAL SUCH AS
ASBESTOS OR PESTICIDES. ALWAYS USE PROPER EYE AND
RESPIRATORY PROTECTION AS REQUIRED BY OSHA OR
OTHER GOVERNMENTAL/PROVINCIAL INSTITUTIONS FOR
THE APPLICATION BEING PERFORMED. TO REDUCE THE
RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE TO RAIN.
STORE INDOORS. WHEN SERVICING, USE ONLY IDENTICAL
REPLACEMENT PARTS. NOT TO BE USED AS A STEP STOOL.
14
(THE USE OF THIS MACHINE IN CONJUNCTION WITH THE
12
PICK UP OF LEAD HAS NOT BEEN INVESTIGATED BY UL)
12
CAUTION: RISK OF FIRE AND INJURY. DO NOT EXCEED
15 AMPS. THE RECEPTACLE IS ENERGIZED WHEN THE
VACUUM IS ON OR WHEN TOOL CONTROL IS ACTIVE.
WHEN TOOL CONTROL IS ACTIVE, THE VACUUM WILL
TURN ON AUTOMATICALLY WHEN THE APPLIANCE
CONNECTED TO THE RECEPTACLE IS TURNED ON.
SAVE THESE INSTRUCTIONS
Grounding Instructions (Fig. B)
This appliance must be grounded. If it should malfunction
or breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock. This
appliance is equipped with a cord having an equipment-
grounding conductor and grounding plug. The plug must
be inserted into an appropriate outlet that is properly
installed and grounded in accordance with all local codes
and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service
person if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug provided
with the appliance – if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
This appliance is for use on a nominal 120-volt circuit and
has a grounding attachment plug that looks like the plug
illustrated in Figure B. Make sure that the appliance is
connected to an outlet having the same configuration as
the plug. No adaptor should be used with this appliance.
Fig. B
Motor
Be sure your power supply agrees with the nameplate
marking. Voltage decrease of more than 10% will cause loss
of power and overheating. D
if this tool does not operate, check power supply.
NOTICE: DO NOT operate this tool on D.C. current.
Tool damage may occur.
GROUNDED
OUTLET
GROUNDING
PIN
WALT tools are factory tested;
e
English
3
Publicidad
