CARE AND CLEANING
REMOVING MINERAL DEPOSITS
Mineral deposits (scale) from water will build up in the Coffee Maker over the time and
impair brewing efficiency and coffee quality. The "Clean" indicator will flash in display after
completing 100 brew cycles. Then, it is time to descale the Coffee Maker.
The Coffee Maker can be descaled using a vinegar and water solution, or by using
NOTE:
a packaged descaling agent, like affresh. Always mix the descaling solution using cool
water.
1
Empty the Brew Basket.
3
Auto Set 1
Hour
Plate Temp
Bold
Press "Clean" button. Then press the
Brew/Cancel
button to begin the Clean
cycle.
After the Clean cycle ends
(approximately 30 minutes), 3 beeps will
sound, and the "Clean" indicator will turn
off.
The Coffee Maker should be run through a complete Clean cycle using a full
NOTE:
Water Tank of the descaling solution.
W11418578A.indb 11
W11418578A.indb 11
AM
PM
Auto
12
12
x
Brew/Cancel
Auto Set 2
Minute
Plate Timer
Clean
2
Cool water
Vinegar
Fill the Water Tank with 1.4 L (6 cup) vinegar
and 1.4 L (6 cup) cool water.
4
AM
PM
PM
Auto
12
12
x x
Brew/Cancel
Auto Set 1
Auto Set 2
Hour
Minute
Plate Temp
Plate Timer
Bold
Clean
Run at least 2 fresh, cool water-only cycles
after the Clean cycle is complete.
11
2/19/2020 2:21:18 PM
2/19/2020 2:21:18 PM