Pulsar PTG1221A2 Manual Del Usuario página 16

Setting The Cutting Height
As shown in Fig 14
Adjust the cutting height only
CAUTION!
when the engine is shut off and the spark
plug boot has been pulled.
The cutting height is centrally adjusted with the cutting height adjusting handle.
Different cutting heights can be selected.
Pull the adjusting handle out and select the desired cutting height.
The handle snaps into the desired position.
From position 1 to position 7.
Setting Required Function
This lawn mower has three functions. These functions can be converted by changing
CAUTION!
accessory setting. Please see the following chart for detail setting.
TO CONVERT MOWER
For rear bagging
For mulching
For side discharging
"√": installed "×" :removed
ADJUSTMENT
MULCHING PLUG
×
√
√
GRASS BAG SIDE DISCHARGE
√ ×
× ×
× √
15
Fig 14