D+H VCD 204-Z-TMS+ A Manual Original página 5

WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this product.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Safety notes
Operating voltage 230 V AC!
Risk of injury from electric shock!
Do not reverse L+N! Connect PE!
- Connection must be carried out by a certified
electrical technician
- Danger of crushing hands and fingers!
- Keep people away from the operating area of the drive
- Keep children away from the control
- Use only in dry rooms
- Suitable for indoor mounting only.
Use rain detector in locations if there is a risk of rain
- Use unmodified original D+H parts only
- Observe the bracket-set mounting instructions
Observe enclosed red safety note!
TMS+ function
Up to two drives can be used in tandem. This function
connects the cut-offs of the two drives in such a way
that if one drive is cut off due to overload, the other
drive will similarly be cut off.
During the learning phase, the activated stroke is
transferred to the tandem drive via the TMS+ function.
Guarantee
You will get 2 years guarantee for all D+H products
from date of verified handing over of the system up to
maximal 3 years after date of delivery, when
mounting and starting has been carried out by an
authorized D+H-distributor.
D+H guarantee is expired, with connection of D+H
components with external systems or with mixing of
D+H products with parts of other manufacturers.
99.831.12 1.2/01/19
Intended use
- Chain drive set for electric opening and closing of
windows and flaps in the facade and roof area
- Useable for daily natural ventilation
- Operating voltage 230 V AC
- Only for inside mounting
- These drives are not compatible with other
VCD 204 drives!
Performance features
- micro processor controlled electronics
- Stroke programming with magnet
- Low running noises
- Connection via plug connector
- Symmetrical chain outlet
- Tandem-safety function (TMS+) for operation of
both drives on one sash
Extent of supply
1x VCD 204-K-TMS+ B with built-in power supply
1x VCD 204-Z-TMS+ A
1x 2,5 m PVC cable
1x 1,2 m patch cable
Dependent on the type of window, different bracket
sets are available separately.
Maintenance and cleaning
Maintenance work is only allowed when the device is in
a de-energized condition! Inspection and maintenance
has to be carried out according to D+H maintenance
notes. Only original D+H spare parts may be used.
Repair is to be carried out exclusively by D+H.
Wipe away debris or contamination with a dry, soft
cloth.
Do not use cleaning agents or solvents.
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following directives:
2014/30/EU, 2014/35/EU
Technical file at:
D+H Mechatronic AG, D-22949 Ammersbek
Dirk Dingfelder
Member of the Board
24.02.2016
English
Maik Schmees
Authorized signatory, Technical Director
VCD 204-K-TMS+ Set
5/16