Publicidad
Idiomas disponibles
Idiomas disponibles
5. Drill 2 holes (5/16") in the corner where the
fireplace is to be displayed. Drill the first
hole 34
/
" from the floor, and the second
5
16
hole 36" from the floor as shown in Figure
26. Put the wall anchors (DD) in the holes
by pinching the anchor tabs together.
Wall Anchor
Figure 26
200083-01A
MANTEL
Mitered Corner Joints
34
/
"
36"
5
16
www.sureheat.com
6. Attach the triangular wood block from the
hardware kit to the holes drilled in step 4
with ST5 screw 2
Figure 27. This block is used to support
the top triangle panel. For thin walls, insert
white key (FF) into wall anchor and push
to "pop" open anchor wings.
7. Push fireplace into corner so that the top
triangle panel is resting on top of the wood
block.
20
/
"
31
11
/
"
1
16
2
Figure 27
/
" (AA) as shown in
3
8
Mitered
Corner
Joints
Wood
Block
Baseboard
29
Publicidad
