Trevi XR 190 BT Guia Del Usuario página 11

RADIO OPERATION
- Use the MODE button (1) to select the radio function.
- Long press the button (7) to start scanning and storing radio stations auto-
matically.
- Once the stations have been stored, press the button (6) to select the station
previous or the button (8) to select the next station.
- If you want to search for a particular radio frequency, press the REP / CH key
(2) until the current frequency appears and then press the keys (6) and (8).
To return to the selection of the memorized radios, press the REP / CH button
(2) again.
MICRO SD CARD OPERATION / USB MEMORY
- Turn on the speaker.
- Insert a Micro SD card into the slot (14) keeping the electrical contacts
facing to the front of speaker, or insert a USB memory (16).
- Playback will start automatically.
- Press the (6) key once to move to the previous track, press the (8) key once
to move to the next track.
- Long press the buttons (8) and (6) to fast forward / reverse the playback of
the track being played.
- Press the button (7) to pause, press it again to resume playback.
AUX IN OPERATION
- Turn on the speaker.
- Connect a 3.5mm jack cable to the AUX socket (15) and the other end to the
external unit.
- Start playback from the external device.
MICROPHONE INPUT
Insert an external microphone (not supplied) into the MIC input (17) to amplify
your voice.
Adjust the microphone volume using the adjustment (18).
Adjust the ECHO effect on the voice by adjusting (19).
REC FUNCTION
In SD / USB mode, by long pressing the REC (3) button you can activate the voice
recording function on the microphone. When active, music playback is interrupted
and the word REC followed by the recording time appears on the display. To stop
recording, press the REC key (the display shows the word PAUS). To ascend the