Publicidad
54
Hinweise zur
elektromagnetischen
Verträglichkeit (EMV)
Recommended separation distances between portable and mobile RF communications equipment and
The IMAGE1 S™ 4U camera head is intended for use in an electromagnetic environment in which the HF disturbances are controlled. The customer or user
of the IMAGE1 S™ 4U camera head can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the IMAGE1 S™ 4U camera head as recommended below, according to the maximum output power of the
communications equipment.
Rated maximum output power
of transmitter
[W]
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance D in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
1
NOTE: At 80 MHz and 800 MHz, the separation distance for higher frequency range applies.
1
NOTE: These guidelines may not apply in all situations. The propagation of electromagnetic quantities is affected by absorptions and reflections of
structures, objects and people.
Information on
electromagnetic
compatibility (EMC)
Table 6
the IMAGE1 S™ 4U camera head
Separation distance d [m]
as a function of the transmitter frequency
80 MHz to < 800 MHz
150 kHz to < 80 MHz
f
0.12
0.38
1.2
3.8
12
Indicaciones sobre
compatibilidad
electromagnética (CEM)
800 MHz to 2.5 GHz
f
h
0.12
0.38
1.2
3.8
12
0.23
0.73
2.3
7.3
23
Publicidad
