Publicidad
Idiomas disponibles
Idiomas disponibles
2.3 Levelling door
1) Precautions before operation:
Before operation of accessories, it shall be ensured that the refrigerator is disconnected from power. Before
adjusting the door, precautions shall be taken to prevent any personal injury.
2) Schematic diagram of levelling the door body
List of tools to be provided
by the user
wrench
Not level
(The picture above is only for reference. The actual configuration will depend on the physical product.)
When the fridge door is low:
Open the door, use a wrench to loosen the locking nut and to rotate the adjusting nut anti-clockwise to raise
the height of the door. Once the doors are aligned, then tighten the locking nut by rotating it anti-clockwise.
When the fridge door is high:
Open the door, use a wrench to rotate the adjusting nut clockwise to lower the height of the door. Once the
doors are aligned, then tighten the locking nut by rotating it anti-clockwise.
Fixed shaft
Levelling feet
Locking nut
Right
32
Adjusting nut
Wrench
Publicidad
