Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND CLEANING (CONTINUED)
3.
Remove the Top Hopper, locate the wire handle on the upper burr, rotate and lift the
handle to remove upper burr.
4.
Clean the upper burr with the cleaning brush. Clean the lower burr with a brush or use a
vacuum cleaner to remove coffee residue.
5.
Align the upper burr back in place and twist clockwise to secure. Replace the Top Hopper
and the Lid.
IMPORTANT: To avoid damage, never wash or immerse the main body of Burr Grinder, burrs,
or power cord in water, or place in the dishwasher.
1.
The Top Hopper, Top Hopper Lid, Bottom Hopper, Bottom Hopper Lid, Grounds Catcher
Tray, and Portafilter Holder can be cleaned with warm, soapy water, then rinse with clean
water and dry with clean soft cloth.
2.
Wipe clean the main body of Burr Grinder with a soft, damp cloth. Dry thoroughly.
ELECTRICAL EQUIPMENT WASTE DISPOSAL
DISPOSAL OF PACKING MATERIAL
The packing material is recyclable and is marked with the recycle symbol
of the packing must therefore be disposed of responsibly and in full compliance with local
authority regulations governing waste disposal.
RECYCLING THE PRODUCT
-
This appliance is marked in compliance with law in the EU and UK covering, Waste
Electrical and Electronic Equipment (WEEE).
-
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product.
-
The symbol
on the product or on the accompanying documentation indicates that it
should not be treated as domestic waste but must be taken to an appropriate collection
centre for the recycling of electrical and electronic equipment.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.
DECLARATION OF CONFORMITY
FOR UNITED KINGDOM
This appliance has been designed, constructed and distributed in compliance with the safety
requirements of UK Legislation: Electrical Equipment (Safety) Regulations 2016,
Electromagnetic Compatibility Regulations 2016. The Ecodesign for Energy-Related Products
and Energy Information (Amendment) (EU Exit) Regulations 2019. The Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
FOR EUROPEAN UNION
This appliance has been designed, constructed, and distributed in compliance with the safety
requirements of EC Directives: Low Voltage Directive 2014/35/EU, Electromagnetic
Compatibility Directive 2014/30/EU, Ecodesign Directive 2009/125/EC, RoHS Directive
2011/65/EU and following amendments.
. The various parts
7
Publicidad
