Specifications
FOR THE CUSTOMERS IN THE USA.
POUR LES CLIENTS AUX ÉTATS-UNIS.
AUDIO POWER SPECIFICATIONS
CTA2006 Standard
Continuous Power Output:
100 W RMS × 6 Channels at 4 Ω
and ≤ 1% THD+N
165 W RMS × 6 Channels at 2 Ω
and ≤ 1% THD+N
Signal to Noise:
76 dBA reference 1 Watt RMS
Circuit system:
Class D Technology circuit
Pulse power supply
Inputs:
RCA pin jacks
Input level adjustment range:
0.2 V – 8 V (RCA pin jacks)
3 V – 16 V (high-level input)
Outputs:
Speaker terminals
RCA pin jacks
Speaker impedance:
2 Ω – 8 Ω (stereo)
4 Ω – 8 Ω (when used as a bridging amplifier)
Maximum output:
6 Speakers: 270 W × 6 (at 2 Ω) / Total 1 620 W
Rated output (supply voltage at 14.4 V, 1 kHz, 1%
THD):
3 Speakers: 330 W × 3 (at 4 Ω)
6 Speakers: 165 W × 6 (at 2 Ω), 100 W × 6 (at 4 Ω)
Frequency response:
10 Hz – 40 kHz (
THD (total harmonic distortion):
0.05% or less (at 1 kHz, 4 Ω)
Low-pass filter:
50 Hz – 500 Hz, 12 dB/oct
500 Hz – 5 kHz, 12 dB/oct
High-pass filter:
50 Hz – 500 Hz, 12 dB/oct
500 Hz – 5 kHz, 12 dB/oct
Power requirements:
12 V DC car battery (negative ground (earth))
Power supply voltage:
10.5 V – 16 V
14
EN
dB)
Current drain:
At rated output: 50 A (4 Ω, 100 W × 6)
Remote input: 4 mA
Dimensions:
Approx. 380 mm × 60 mm × 215 mm
(15 in × 2
3
/
in × 8
8
380 mm (15 in)
330 mm (13 in)
215 mm (8
1
/
in)
2
196 mm (7
3
/
in)
4
60 mm (2
3
/
in)
8
Mass:
Approx. 4.06 kg (8 lb 15 oz) not incl. accessories
Package contents:
Main unit (1)
Parts for installation and connection (1 set)
Design and specifications are subject to change
without notice.
1
/
in) (w/h/d)
2