Preventive Maintenance; Daily Maintenance - Chattanooga FLUIDOTHERAPY FLU110D Manual De Usuario

PREVENTIVE MAINTENANCE

DAILY MAINTENANCE

Before any maintenance is performed or attempted, unplug the unit
from the power source to prevent the possibility of electrical shock.
CLEAN INLET FILTERS
At the end of each work day, unplug the
unit and clean the Inlet Filters on the unit.
Carefully remove the filter retainer and
wash the filter and screen with a mild
antibacterial soap and water. Thoroughly
dry the filter and screen before placing
back on the unit.
NOTE:
Should your unit have the earlier style inlet
filters, gently clean the filter using a soft
bristle brush. Be careful not to puncture or
damage the filter.
Should the filter become damaged, torn, or
punctured, call your dealer for replacement
of the filter before resuming operation.
INSPECT SLEEVE CONDITION
Inspect the port sleeves for tears, rips, and weak seams. Replace all
sleeves that show signs of tears, rips, weak, or loose seams, or excessive
wear. Keeping the sleeves in excellent condition prevents excessive
spillage of the Cellex medium and prevents the medium from entering
the heat chamber of the unit.
25 25
Fluidotherapy® - Dry Heat Therapy
REFILL WITH CELLEX MEDIUM
Refill the unit with Cellex Dry Heat Medium to
approximately one (1) inch above the bottom of
the arm treatment ports of the unit.
NOTE:
Use of other than Cellex Medium may cause
premature failure of the Fluidotherapy unit(s).
ARM PREHEAT TIMER
Plug the unit back into an approved power
source. If the "Preheat Timer" is used, press
the "PREHEAT TIMER" button once and the
"PREHEAT TIMER ON" indicator will illuminate.
NOTE:
The "PREHEAT TIMER ON" indicator must be
illuminated in order for the Preheat Timer to
automatically come on at the default time the
next morning.
The Fluidotherapy Preheat Timer does not
operate on Saturday or Sunday. However,
for Monday morning preheat, set the unit as
described above on Friday evening.