Tabla de contenido
Publicidad
INSERTING
ZIPPERS
CENTERED
INSERTION
m
No. 1 Straight Stitch (Center Needle Position)
Zipper Foot
_CAUTION:
To prevent
accidents.
Zipper foot should be used for sewing center
needle position straight stitch No. 1 only. It is
possible that needle could hit the presser foot and
break when sewing other patterns.
1. Baste the zipper opening to the seam line.
a: Top stitch,
b: End of opening,
c: Basting
d: Wrong Side of fabric
2. Press open the seam allowance.
Baste the zipper tape,
Place the open zipper face down on the seam
allowance with the teeth against the seam line.
3. Attach the zipper foot,
Attach the left side of the presser foot pin to the
presser foot holder when sewing the right side
of the zipper, and right side of the presser foot
pin to the holder when sewing the left side of
the zipper.
4. Stitch left side of the zipper from bottom to top.
5. Stitch across the lower end and right side of
zipper.
Remove the basting and press.
Q
m
I.....
7-10 mm
6O
Publicidad
Tabla de contenido
