Publicidad
Idiomas disponibles
Idiomas disponibles
Care and maintenance
Burner caps and heads
NOTE
Before removing the burner caps and heads, remember their size and location. Replace
them in the same location after cleaning.
Wash burner caps and burner heads in hot, soapy water and rinse with clean running
water. You may scrub with a plastic scrubbing pad to remove burned-on food particles.
Use a sewing needle or paper clip to unclog the small holes in the burner head, if required.
CAUTION
• Do not wash any burner parts in a dishwasher.
• Do not use steel wool or scouring powders to clean the burners.
Brass burner head
Brass burner Caps
38
English
FULL_RANGE TOP_DTT48T960GS_DG68-01474A-01_EN+MES+CFR.indb 38
FULL_RANGE TOP_DTT48T960GS_DG68-01474A-01_EN+MES+CFR.indb 38
NOTE
• The brass parts of your burner will
change color. However, this will not
affect performance.
• After cleaning, check that all burner
ports are unclogged.
• You may swap out the original burner
caps for porcelain caps if desired.
• To remove burnt on grease, soak the
brass burner cap in 1 cup of water and
either 1 table spoon of white vinegar or
1 table spoon of lemon juice. Do not use
metallic brush while cleaning it. It can
damage the brass parts.
2023-04-25 오후 6:03:40
2023-04-25 오후 6:03:40
Publicidad
