Probuilder 56149 Manual De Instrucciones página 29

another battery pack.
Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from
the battery may cause irritation or burns.
Do not use a battery pack or tool that
is damaged or modified. Damaged
or modified batteries may exhibit
unpredictable behaviour resulting in fire,
explosion or risk of injury.
Do not expose a battery pack or tool to
fire or excessive temperature. Exposure
to fire or temperature above 130 °C may
cause explosion.
Follow all charging instructions and
do not charge the battery pack or tool
outside the temperature range specified
1
MAIN COMPONENTS
1. Bit holder
2. Torque selector
3. Working light
4. Reverse/forward switch
5. Battery indicator
6. Battery indicator button
7. Power on/off button
8. Knob for angling the handle
9. Charging plug
10. Handle
11. Carrying strap
in the instructions. Charging improperly
or at temperatures outside the specified
range may damage the battery and
increase the risk of fire.
Service
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that
the safety of the power tool is maintained.
CHARGING THE BATTERY
Fully charge the battery before using the
akku screwdriver for the first time.
Plug the supplied adapter into the wall
socket and plug the charging plug from
the adapter into the charging socket (9)
on the screwdriver.
One charge takes 3-5 hours.
Unplug the adapter from the wall socket
after charging is complete.
Never charge for more than 5 hours at a
time.
Angling the handle:
Press the button (8) and tilt the handle
to the desired angle. Release the button
again and make sure the handle engages.
Setting the torque
By adjusting the torque of the screwdriver,
you can ensure consistent driving of
2
3
4
29
5 6 8
7
9
GB
10
11