Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT SPECIFICATIONS
Motor .................................................................. 40 Volt DC
Clearing Width ............................................................ 20 in.
Clearing Depth ........................................................... 10 in.
KNOW YOUR SNOW BLOWER
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BATTERY COVER
The battery cover protects the battery port from moisture
and debris.
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Snow Blower
Handle Mounting Hardware
Upper and Intermediate Handles
Chute Deflector
Chute Rotation Lever Upper and Lower Rods with Hitch Pin
Operator's Manual
FEATURES
Impeller Size ............................................................... 17 in.
Wheel Size .................................................................... 8 in.
Throwing Distance ............................................. Up to 25 ft.
CHUTE DEFLECTOR HANDLE
The chute deflector handle allows you to change the distance
that snow will discharge from the chute.
CHUTE ROTATION LEVER
The chute rotation lever allows you to choose the direction
that snow will discharge from the snow blower. The lever
allows the chute to rotate up to 180º.
ASSEMBLY
WARNING:
If any parts are damaged or missing, do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not insert battery pack until assembly is complete and
you are ready to mow. Failure to comply could result in
accidental starting and possible serious personal injury.
7 — English
Publicidad
