Publicidad
Idiomas disponibles
Idiomas disponibles
9
INSTALLATION
WARNING
Do not change or make accessories that are not
recommended by the manufacturer.
WARNING
Do not connect the machine to the power supply until you
assemble all the parts.
9.1
UNPACK THE MACHINE
WARNING
It is not necessary to assemble the machine.
WARNING
•
If the parts have damage, do not use the machine.
•
If you do not have all the parts, do not operate the
machine.
•
If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove the machine from the box.
4. Discard the box and package in compliance with local
regulations.
9.2
ASSEMBLE THE CASTERS
1. Align the caster with the tank and slide it into the place.
2. Insert the screw and tighten it with a Phillips head
screwdriver (not included).
3. Repeat the above steps four times.
English
9.3
ASSEMBLE THE ACCESSORY
HOLDER
1. Align the accessory holder with the tank and slide it into
the place.
2. Insert the screws.
3. Use a phillips screwdriver (not included) to tighten.
9.4
INSERT THE HOSE
6
1. Align either of the grooves in the tube with the tabs on
the hose.
2. Insert the locking end of the hose into the port on the
collection tank and turn clockwise to lock into place.
3. Insert your desired accessory onto the end of the hose
securely.
7
EN
Publicidad
