Lampa FC-40 Instrucciones De Uso página 19

5. FUNCTIONING
Settings
Power ON/OFF
Temperature
controls
USB port: 5V/1A
• Power Supply: connect the appliance to either DC 12/24V or AC 220-240V power supply (use the
included dedicated AC 220-240V adapter).
• Display Screen Initialization: connect the appliance to a power supply, the cooling box will emit a
long beeping sound and the display will be on for 2 seconds before entering in normal operating mode.
• Power ON/OFF: Press
Temperature Setting: press + or – to set the required temperature. It will take 3 seconds for the
•
appliance to save the required temperature (Note: the temperature displayed is the current required
temperature, after setting it the appliance will need some time to reach the set temperature).
Temperature setting range: -20°C~20°C/-4°F~68°F.
Cooling mode: when the appliance is ON and running, press
•
to switch to ECO mode (energy saving mode). (Factory setting is MAX).
• Battery Protection Mode: when the appliance is ON and running, press
the screen flashes, then press it again to select the required protection mode: H (High), M (Medium), L
(Low). (Factory setting is H).
• Voltage Reference:
The voltage is only a theoretical value, as it may vary depending on different conditions and scenarios.
H should be set when the appliance is connected to the car's power supply, while M and S when the product
is connected to a portable or a back-up battery.
13.5
13.5
M
L
ECO
to switch the appliance ON or OFF.
(-20) Current temperature
(°C °F) Temperature unit
(H.M.L.) Car Battery Protection Module
(13.5V) Current voltage
ECO
MAX (Fast cooling)
ECO (Energy-saving, usable only when
connected to the 220-240 AC energy supply)
Battery Level (for reference)
to switch to MAX mode, press it again
for a few seconds until
EN
19